All Stainless Worm Drive Hose Clamps

All stainless worm drive hose clamps are used with small diameter hoses and tubing such as air, fluid and fuel lines. The minimum diameter is 3/8" and the maximum is about 8-1/2". And more sizes available.The bands are 5/16" wide and the screw is a 5/16’’ Hex Head. Their small size permits installation in confined places.

● Band width:9/16”

● Band thickness: 0.024” (0.6mm)

● Screw: 5/16″ Hex Head

● Under RoHS & REACH standard

● Installation Torque: 35 in-lbs (4Nm)

● Failure torque (minimum)  :

W1 44 in-lbs(5 Nm) 

W2 W4 W5  70 in-lbs(8 Nm)

● Free running torque（max）:

6 in-lbs (0.7 Nm)

● Standard ：SAE 

W1 : All in carbon steel with zinc plated

W2: Band and housing in stainless steel SS300, screw in carbon steel with zinc plated

W4: All  in SS300

W5: All in SS316

Available in bulk packaging, pack of 10, blister card packaging, polybag packaging, tag packaging, and customer designed packaging.