KNOWLEDGE
- How to choose the right size of the hose clamps?Hose clamp size refers to their clamping diameter range, which is listed as a minimum and maximum useable diameter. To determine the size needed, install the hose on the fitting or pipe (which expands the hose), measure the outside diameter of the hose, then select a clamp that accommodates that diameter in about the middle of its range.KNOWLEDGE September 15, 2020
- The composition and design of the hose clampThe perforated hose clamp and non-perforated hose clamp are very common. The inner side of the non-perforated hose clamp band is smooth and has no hose on the band. The non-perforated hose clamps are suitable for clamping hoses made of flexible materials, for example, the rubber, providing a leakproof seal. The non-perforated hose clamps will not cut the hose or mar its surface. Even after a perfect installation, the connection may be subject to large shaking and pulling force between the rigid clamp and the hose due to mechanical vibrations or other external influences. Then, leaks may occur when the hose is cut by the hose clamp band.KNOWLEDGE September 09, 2021
- What is the torque spec of the hose clamp?Torque, the distance of force applied to a material to produce torsional deformation, in N-m, and lb-ft is the imperial unit of torque.Any mismatch or improper fastening may result in damage, failure or possible bodily harm to the product. Before installing any hardware, make sure all parts are in nKNOWLEDGE July 23, 2021
-
- How to choose the right grade of stainless steel for your clamps?There are many types of hose clamps,different sizes, and the scope of application also touches all aspects. From small water pipes at home to large industrial pipes. At present, various grades of stainless steel clamps and clamps with different coatings have appeared in response to the rust, weathering and other problems that the clamps face. The price is also different due to the manufacturing cost, so for the stainless steel clamps used in different scenes, besides knowing which type of clamp should be used, do we also know how to choose the different stainless steel grades of each clamp? How to choose the most suitable clamp within a reasonable cost range?KNOWLEDGE September 12, 2020
- How to install and tighten the hose clamp?To install the hose clamp, first measure the size of the clamp required for your hose, and then select the appropriate clamp. According to the conditions of use, whether to choose embossed band clamps or perforated hose clamps. How to measure can refer to: How to choose the right size of the hose clamps? Match the type and size of the clamp to the diameter of the hose to be fixed. The width of the clamp should not exceed the hose connection, and the length of the band should be greater than the diameter of the hose, but it should not be too long. The extended part after clamping may cause the risk of scratching to the human body.KNOWLEDGE September 25, 2020
- How to store and avoid corrosion of stainless steel hose clamps?What is the storage life of the stainless steel hose clamps? Why is stainless steel resistant to corrosion? Causes of stainless steel hose clamps corrosion? How to store stainless steel hose clamps? Simple identification of stainless steel rust resistance.KNOWLEDGE October 23, 2020
- Thumb Screw ClampsChina professional hose clamp manufacturer, professionally provide hose clampsKNOWLEDGE December 18, 2020
- Worm Gear Hose Clamps-Stainless Steel Worm Gear ClampsCommon hose clamp materials are steel, galvanized surface (usually called galvanized steel), and other materials such as stainless steel. Worm gear hose clamps are metal straps with worm drive screws and threads. The clip is unscrewed with the help of a screwdriver and can be used to fix the PVC hose to a fixed socket. Often used for pipe connections in coolant systems. As stainless steel can adapt to more environments, we recommend using stainless steel worm gear clamps. We provide stainless steel worm gear clamps in many types of materials. From carbon steel to marine grade 316 stainless steel.KNOWLEDGE January 14, 2021
- Worm Gear Hose Clamps-Non-perforated Clamps(Embossed Band Clamps)Non-perforated (embossed) clamps are universal worm gear clamps, sometimes called worm drive clamps. They have universal non-perforated tapes with high tensile strength. The wide belt hole is not perforated and has a smooth inside with curled edges. This can eliminate hose damage and increase clamping force. It has strong versatility and can be used in industrial applications such as automobiles and ships. The tightening ability is strong and will not slack over time.KNOWLEDGE December 24, 2020